WELLDONE MINING
info@welldoneenergy.com
Welldone Mining · Compressor Supply & Rig Matching

Air Compressors for DTH Drilling Rigs

Mobile diesel screw compressors for quarry, mining and water-well drilling. Buy a compressor separately for your existing rig, or request a matched drilling package. We review air delivery, operating pressure and site conditions before recommending a configuration.

Already own a drilling rig? Send its model or specification sheet. Not sure which compressor you need? Tell us your application, hole diameter and depth.

Standard mobile compressor line
Customized OEM compressor line
Compressor-only or complete package
Technical selection before quotation
Why it matters

Match Air Delivery and Pressure to the Job

Compressor selection affects drilling performance, fuel use and equipment compatibility. A pressure figure alone is not enough: the required air delivery must be available at the selected operating pressure.

Too Small

Insufficient air delivery or pressure can limit hammer performance and hole cleaning. Check the actual hammer requirements, drilling depth and other air consumers before selecting a unit.

Too Big

A larger compressor is not automatically a better fit. Compare the expected load, fuel use, transport requirements and future capacity needs for your project.

Wrong Pressure

Use the hammer manufacturer's operating requirements and the rig's pressure limits. Allow for site conditions and pressure losses instead of selecting from the compressor's headline pressure alone.

The range

Mobile Compressors for Your Existing Rig or New Package

Choose from standard configurations and customized mobile units. Compressor-only supply and complete drilling packages are available. The ranges below cover different configurations, not the guaranteed output of every model; the quotation confirms the exact model, free air delivery at working pressure, engine and delivery terms.

Welldone Mining mobile air compressor production line
Welldone Mining · mobile compressor range

One Range for Quarry, DTH and Deep-Well Work

  • Mobile diesel units from compact towable packages to high-output systems
  • Engine options: Yuchai / Xichai / Cummins, 50–775 HP
  • Available pressure range: 8–35 bar (0.8–3.5 MPa), depending on configuration
  • Welldone Mining nameplate and order-specific configuration
Compact towable screw air compressor
Compact mobile range

Flexible Air for Quarry Benches

  • Compact towable chassis for remote and uneven sites
  • Capacity and pressure matched to the rig before production
  • Easy service access and order-specific nameplate
Open canopy diesel screw air compressor internal system
High-output · two-stage

High Pressure Without Guesswork

  • DTH and deep-well applications; suitability checked against the actual hammer and site
  • Air-delivery range: 18–43 m³/min (approximately 636–1,519 CFM), depending on model
  • Pressure range: 17–35 bar (1.7–3.5 MPa); confirm the flow/pressure combination in your quotation
  • Open-canopy inspection before delivery
Large mobile screw air compressor in factory
Large mobile range

Built for Continuous Drilling Duty

  • Heavy-duty mobile enclosure for long-hour operation
  • Engine options up to 775 HP
  • Selected for your existing drilling equipment or a new matched package
Product photography is used to show available configurations, enclosure construction and factory workmanship. Images may represent different units within our standard and customized supply ranges; the final model, air delivery, pressure, engine and Welldone Mining nameplate are confirmed in the quotation.
Application matching

Your Rig's Air Demand — Matched Before You Order

Use your rig and hammer specifications as the starting point, including equipment you already own. These catalogue ranges help start the selection discussion; they are not universal compressor recommendations. For a new equipment package, see how the full quarry drilling solution comes together.

Rig catalogue air-demand references — final compressor selection requires project-specific review
Rig (KYLC / KH series)Hole · DTH hammerAir demand (spec sheet)Selection check before quotation
KYLC612 / KYLC617
open DTH crawler rig
90–120 mm · 3"/4" 9–15 m³/min @ 0.8–1.6 MPa Confirm the required free air delivery at working pressure, with the selected hammer, engine and site conditions. Project review
KYLC712
open DTH crawler rig
90–120 mm · 3"/4" 10–18 m³/min @ 0.7–1.8 MPa Confirm the flow/pressure combination and duty cycle before selecting a mobile unit. Project review
KYLC720 / 720S / 729S
large-hole DTH rig
115–260 mm · 4"/5"/6" 11–35 m³/min @ 1.0–2.4 MPa Select against the actual demand within this range. Do not assume a 20 m³/min unit covers a requirement of 35 m³/min. Verify air delivery
KYLC843 / 843B / 845 / 847 · KH101 / KH103
integrated DTH rig
90–150 mm · 3"/4" 12–15 m³/min @ 1.5–2.0 MPa Onboard screw compressor: verify the specific rig configuration and site capability before adding or replacing external air supply. Onboard system
Deep well rigs
(water well / exploration)
High-pressure DTH 18–35 m³/min @ 1.7–2.5 MPa Review required delivery pressure, flow, hole depth and groundwater conditions before selecting the compressor. Project review

The rig air-demand figures above are catalogue references and must be checked against the current specification for your exact rig. They do not establish compressor performance at every combination of flow and pressure. Final selection considers the hammer, depth, pressure losses, elevation, ambient temperature and required reserve. The quotation confirms the model, engine and price. Not sure which rig suits your formation? Ask for a customized drilling solution — our engineers match rig, hammer and air as one package. High-pressure deep-well drilling pairs with our water well drilling solution.

Service

Service Parts and Technical Support

Plan service parts before the next maintenance interval. Send your compressor model, nameplate and part number so we can check compatibility, availability and dispatch options. Shipping and repair times depend on the part, destination and work required.

Why Welldone Mining

One Supplier for Rig, Air and Parts

  • Two compressor supply lines. Standard models plus customized mobile OEM units, selected according to pressure, capacity, engine and project budget.
  • Application-based selection. We review the rig, hammer, air demand and site conditions, whether you need a standalone compressor or a complete package.
  • Technical support. Share the model, operating conditions and fault details. Response arrangements, parts availability and warranty terms are confirmed for your order; response time is not a repair-time guarantee.
  • One contact for your supply scope. Request a compressor alone or combine the rig, compressor and drilling tools in a coordinated quotation.
Welldone Mining air compressors ready for delivery
FAQ

Common Questions

What size compressor does my drilling rig need?

Send your rig model, hammer specification, hole diameter and target depth, together with the destination and site conditions. If known, include required air delivery and operating pressure. If you do not know these values, send the equipment specification sheet or describe the job so we can help identify the information needed for selection.

Should I take diesel or electric?

Mobile diesel units are an option for sites without a suitable grid supply. At fixed sites, ask us to compare an electric configuration against available power, working hours and local energy costs. Confirm the exact engine or motor configuration and applicable local requirements before ordering.

Can I buy only the compressor for my existing drilling rig?

Yes. Request a standalone compressor for your existing equipment or a complete drilling package. For an integrated rig with an onboard compressor, tell us whether you need a replacement, additional air supply or a new rig package so we can check the correct scope.

What spare parts and support are included?

The quotation should list the included service kit, manuals, spare parts, warranty and support arrangements. Availability and dispatch times are confirmed for the exact unit and destination. Do not assume a particular spare part or on-site service is included unless it appears in the agreed supply scope.

Project enquiry

Get a Matched Compressor Quote

Tell us what you need to buy and where it will be used. A rig model or specification sheet is a useful starting point; you do not need to know every technical parameter before contacting us.

Include These Project Details

  • Supply scope: compressor only, rig + compressor package, replacement unit, or service parts.
  • Application and destination: quarry, mining, water well or another use; country and project location.
  • Equipment requirement: rig/hammer model, hole diameter and depth; pressure and air delivery if known. If unsure, request selection help.
  • Purchase plan: quantity and expected purchase timeframe.

Already Have a Rig or Compressor?

Include the model, specification sheet or nameplate details. For replacement parts, add the part number and quantity. This helps us check compatibility before quoting.

Email Your Project Details

info@welldoneenergy.com

Send a message
Have other questions?

Send us a message — our team will reply within 24 hours.
Whether you need OEM/ODM service, private label design, or product samples, we’re ready to help.

GET A QUOTE

Tell us your drilling application, hole diameter, drilling depth and rock condition. Our team will recommend suitable drilling rigs, air compressors and drilling tools for your project.